The K9 Toyota Tacoma Bed Rail Rack is the latest rack option from the legendary Eezi-Awn brand. It uses the same platforms as the K9 Roof Racks, but with a unique bed rail mounted leg designed specifically for Toyota’s under rail mounting channel. It saddles on the bed rail top surface, and attaches to the channel under the bed rail with 2 bolts per leg. It then attaches to the bottom cross braces on the K9 Platform, for a very stout rack solution over the bed of your truck.
Sizes
The K9 Bed Rail Rack for the Toyota Tacoma is a great size solution for both the 5’ and 6’ bed. The bed rail legs taper in on each side from the bed rail to give it a very sleek look. The length is within inches of the front and back of the bed. The rack is low enough to provide access to items in the bed, and still keep your equipment below cab high for great aerodynamics and low center of gravity. Perfect for adding a Roof Top Tent. With the tailgate locked, it also provides protection against theft of your equipment.
Capacity
Capacity of the K9 roof rack system is broken into two measurements, static weight and dynamic weight. Static is when the vehicle is stationary. Dynamic is when the vehicle is in motion. We have not tested the K9 racks on vehicles to the point of roof failure. We can tell you what we have tested ourselves effectively. A dynamic capacity in the range of 500 pounds is possible. That load included a RTT, awning, dual fuel can holder, aluminum storage case with recovery gear, shovel, axe, under mount table, light bar, etc on a 2.2M long rack. A static capacity of 1000 pounds is possible. An example of static load increase would be adding people in the tent on the roof. Please understand these capacities are on vehicles that have modified suspensions designed to manage this amount of weight. They are not a warrantied or guaranteed capacity. Your load capacity will vary.
No Drilling
The K9 Roof Rack System for the Tacoma Bed Rail requires no drilling at all for any size rack. Our proprietary Bed Rail Legs attach directly to the OEM under rail channel. All hardware included.
Installation
Installation of this rack system can be done by one person in approximately 1 hour. Help lifting the platform on the bed would be appreciated. You start by installing the Bed Rail Leg threaded plates into the under rail channel. Attach the Bed Rail Leg to the plates with the included hardware, leaving them loose for lateral adjustment. Lay platform on top of Bed Rail Legs, and locate legs under each corresponding cross brace. Attach legs to the platform with associated hardware, loose for the moment. Align rack where you prefer, front to back and side to side. Tighten legs to channel and to platform. All good to go.
System Components
The components used on the Tacoma bed rail rack systems include a set of K9 Bed Rail feet (2 per platform cross brace), and a platform.
System Accessories
The Eezi-Awn K9 Roof Rack System comes with a complete array of bolt on accessories. Jerry Can holders, Axe mounts, Shovel mounts, Hi-Lift Mounts, Max Trax Mounts, Awning Mounts, Under Rack Table mounts, and much more. Take a look at the accessories page to see all our options.
As experienced Overlanders, we fully understand that things do not always go according to plan.
That is why we offer you our 30-Day Return Policy, so you can get back on the road for more adventures in a heartbeat.
Read more about the terms and conditions that apply in our Easy Returns Policy
Shipping is FREE on most orders with a total value above $250 to customers within the lower 48 United States (Contiguous United States). NOTE: For Front Runner orders, Free Shipping to the lower 48 states ONLY applies to rack kits and orders with a total value above $1,500
However, due to their size and weight, some products may require an LTL truck flat fee shipping charge based on the zone you live in. This flat fee rate will be calculated at checkout, but ONLY for certain brands and products.
Products where the LTL truck flat fee may apply are rooftop tents, roof racks, awnings, bumpers, bed racks, rock sliders, fridges, and drawer systems.
Brands where Flat Fee Shipping based on zones apply:
Please refer to the zone map displayed below for your location.
Read more about the terms and conditions that apply in our Shipping Policy
We know you have plenty of options when shopping for Overlanding gear online, so why choose PeakGear? Because we’re more than just a store—we’re your trusted partner for every adventure. Here’s why shopping with us is a game-changer:
Your security is our top priority. We use encrypted SSL technology and are Level 1 PCI DSS compliant, ensuring your transactions and personal information are always protected. When you shop with us, you can trust that your data is safe and your purchase is secure.
We’ve been Overlanding since 1998 — long before it became a buzzword. With 25 years of experience testing gear in the toughest conditions across six continents, we only sell products we would use ourselves. If it’s in our store, it’s been trail-tested and approved.
No matter what you drive—a passenger car, pickup truck, or a fully rigged 4x4—we have the knowledge to help you build the perfect setup. Our team has driven nearly everything and can guide you toward the best gear for your specific adventure needs.
Fast and FREE Shipping on most orders above $250 to the lower 48 states
30-Day Easy Returns. Not happy with your product, we'll take it back no questions asked, and without charging you ANY restocking fee. Ever!
We don’t just sell gear — we build relationships and pride ourselves on providing the best service, anywhere. Our dedicated Customer Service team is made up of real Overlanders who understand your needs and are ready to help with expert advice, product recommendations, and troubleshooting. Whether you have a question before purchase or need support after, we’re always here to ensure your experience is seamless and stress-free.
Whether you’re a beginner just starting out or a seasoned pro pushing the limits, we believe Overlanding should be accessible to all. That’s why we offer both entry-level products and top-tier gear, ensuring every adventurer finds what they need. More than that, we’re here to help, guide, and support you every step of the way.
The K9 Toyota Tacoma Bed Rail Rack is the latest rack option from the legendary Eezi-Awn brand. It uses the same platforms as the K9 Roof Racks, but with a unique bed rail mounted leg designed specifically for Toyota’s under rail mounting channel. It saddles on the bed rail top surface, and attaches to the channel under the bed rail with 2 bolts per leg. It then attaches to the bottom cross braces on the K9 Platform, for a very stout rack solution over the bed of your truck.
Sizes
The K9 Bed Rail Rack for the Toyota Tacoma is a great size solution for both the 5’ and 6’ bed. The bed rail legs taper in on each side from the bed rail to give it a very sleek look. The length is within inches of the front and back of the bed. The rack is low enough to provide access to items in the bed, and still keep your equipment below cab high for great aerodynamics and low center of gravity. Perfect for adding a Roof Top Tent. With the tailgate locked, it also provides protection against theft of your equipment.
Capacity
Capacity of the K9 roof rack system is broken into two measurements, static weight and dynamic weight. Static is when the vehicle is stationary. Dynamic is when the vehicle is in motion. We have not tested the K9 racks on vehicles to the point of roof failure. We can tell you what we have tested ourselves effectively. A dynamic capacity in the range of 500 pounds is possible. That load included a RTT, awning, dual fuel can holder, aluminum storage case with recovery gear, shovel, axe, under mount table, light bar, etc on a 2.2M long rack. A static capacity of 1000 pounds is possible. An example of static load increase would be adding people in the tent on the roof. Please understand these capacities are on vehicles that have modified suspensions designed to manage this amount of weight. They are not a warrantied or guaranteed capacity. Your load capacity will vary.
No Drilling
The K9 Roof Rack System for the Tacoma Bed Rail requires no drilling at all for any size rack. Our proprietary Bed Rail Legs attach directly to the OEM under rail channel. All hardware included.
Installation
Installation of this rack system can be done by one person in approximately 1 hour. Help lifting the platform on the bed would be appreciated. You start by installing the Bed Rail Leg threaded plates into the under rail channel. Attach the Bed Rail Leg to the plates with the included hardware, leaving them loose for lateral adjustment. Lay platform on top of Bed Rail Legs, and locate legs under each corresponding cross brace. Attach legs to the platform with associated hardware, loose for the moment. Align rack where you prefer, front to back and side to side. Tighten legs to channel and to platform. All good to go.
System Components
The components used on the Tacoma bed rail rack systems include a set of K9 Bed Rail feet (2 per platform cross brace), and a platform.
System Accessories
The Eezi-Awn K9 Roof Rack System comes with a complete array of bolt on accessories. Jerry Can holders, Axe mounts, Shovel mounts, Hi-Lift Mounts, Max Trax Mounts, Awning Mounts, Under Rack Table mounts, and much more. Take a look at the accessories page to see all our options.
As experienced Overlanders, we fully understand that things do not always go according to plan.
That is why we offer you our 30-Day Return Policy, so you can get back on the road for more adventures in a heartbeat.
Read more about the terms and conditions that apply in our Easy Returns Policy
Shipping is FREE on most orders with a total value above $250 to customers within the lower 48 United States (Contiguous United States). NOTE: For Front Runner orders, Free Shipping to the lower 48 states ONLY applies to rack kits and orders with a total value above $1,500
However, due to their size and weight, some products may require an LTL truck flat fee shipping charge based on the zone you live in. This flat fee rate will be calculated at checkout, but ONLY for certain brands and products.
Products where the LTL truck flat fee may apply are rooftop tents, roof racks, awnings, bumpers, bed racks, rock sliders, fridges, and drawer systems.
Brands where Flat Fee Shipping based on zones apply:
Please refer to the zone map displayed below for your location.
Read more about the terms and conditions that apply in our Shipping Policy
We know you have plenty of options when shopping for Overlanding gear online, so why choose PeakGear? Because we’re more than just a store—we’re your trusted partner for every adventure. Here’s why shopping with us is a game-changer:
Your security is our top priority. We use encrypted SSL technology and are Level 1 PCI DSS compliant, ensuring your transactions and personal information are always protected. When you shop with us, you can trust that your data is safe and your purchase is secure.
We’ve been Overlanding since 1998 — long before it became a buzzword. With 25 years of experience testing gear in the toughest conditions across six continents, we only sell products we would use ourselves. If it’s in our store, it’s been trail-tested and approved.
No matter what you drive—a passenger car, pickup truck, or a fully rigged 4x4—we have the knowledge to help you build the perfect setup. Our team has driven nearly everything and can guide you toward the best gear for your specific adventure needs.
Fast and FREE Shipping on most orders above $250 to the lower 48 states
30-Day Easy Returns. Not happy with your product, we'll take it back no questions asked, and without charging you ANY restocking fee. Ever!
We don’t just sell gear — we build relationships and pride ourselves on providing the best service, anywhere. Our dedicated Customer Service team is made up of real Overlanders who understand your needs and are ready to help with expert advice, product recommendations, and troubleshooting. Whether you have a question before purchase or need support after, we’re always here to ensure your experience is seamless and stress-free.
Whether you’re a beginner just starting out or a seasoned pro pushing the limits, we believe Overlanding should be accessible to all. That’s why we offer both entry-level products and top-tier gear, ensuring every adventurer finds what they need. More than that, we’re here to help, guide, and support you every step of the way.